Additional equipment Fiztex Taps, adapters, etc.

Cooling taps are designed to cool the measured medium, the pressure of which is measured by the device, as well as for their connection to technological equipment.

Models: Cooler outlet, stainless steel, maximum pressure - 40 MPa, Cooler outlet, steel, maximum pressure - 25 MPa

Three-way cranes are designed to connect pressure measuring devices to technological equipment for convenient operation during pressure relief, replacement of the device, as well as over-flow. The three-way crane has three working positions of the shutter, which allows not only to block the flow (movement) of the measured medium, but also to redirect it.

Models: Three-way solid-pointed, cork crane with a tension nut

Membrane separators are designed to protect the inner cavity of the sensing element of measuring instruments from contact with aggressive, hot, suspended particle-bearing media to be measured.

Models: RM5324 d.50, RM5321 d.88, RM5319 CM d.88, RM5319 d.150

The adapters are designed for mounting devices to technological equipment in an existing landing socket when the connecting thread of the device differs from the thread of the landing socket.

Models: Adapter: galvanized steel, brass, stainless steel

O-rings are designed to seal the connection of the pressure gauge with an adapter, boss (coupling), tap or valve.

Models: O-ring: Nylon, Fluoroplast (F4), copper alloy

Limit pressure indicators are a new alternative way to demonstrate the range of permissible pressure.

Models: O-ring: Nylon, Fluoroplast (F4), copper alloy

The BC valve blocks are designed to connect excess and vacuum pressure measuring devices to the lines with the measured medium. The blocks allow you to cut off the devices from the lines without relieving the pressure of the measured medium, check the zero value of the readings of the devices or purge the pulse lines. For oxygen pressure measurement lines, the parts in contact with the measured medium are degreased and the designation "K" is put.

Models: Valve needle block BK1

Forceps for removing the arrow. A special device for removing the arrow. Allows removal without deformation of both the arrow and the dial.

• Additional equipment of FIZTECH. Technical specifications.